built block question
Thread Starter
|
Senior Member
Joined: Sep 2002
Posts: 145
Likes: 0
built block question
When purchasing a built shortblock from a vendor such as JLP, is there a lot of labor or additional parts needed for the swap? I wouldn't be doing this myself but just curious as to what all is involved. The way most of these built blocks are advertised (complete engine, balanced, blueprinted) there isn't much to do but swap in the new with the old.
Senior Member
Joined: Aug 2003
Posts: 908
Likes: 0
From: Alabama
There is still some expense in the "small parts", like head gaskets are about $150 for the pair, plus other misc. gaskets, sealants, fluids.
I spent about $500 in small parts like ARP head studs were $176, oil pan and gaskets and misc. was another $300.
I had also bent a few valves when the motor was destroyed and that was another $300.
Hope this helps!!
I spent about $500 in small parts like ARP head studs were $176, oil pan and gaskets and misc. was another $300.
I had also bent a few valves when the motor was destroyed and that was another $300.
Hope this helps!!
Thread Starter
|
Senior Member
Joined: Sep 2002
Posts: 145
Likes: 0
Originally posted by KB ZILLA
There is still some expense in the "small parts", like head gaskets are about $150 for the pair, plus other misc. gaskets, sealants, fluids.
I spent about $500 in small parts like ARP head studs were $176, oil pan and gaskets and misc. was another $300.
I had also bent a few valves when the motor was destroyed and that was another $300.
Hope this helps!!
There is still some expense in the "small parts", like head gaskets are about $150 for the pair, plus other misc. gaskets, sealants, fluids.
I spent about $500 in small parts like ARP head studs were $176, oil pan and gaskets and misc. was another $300.
I had also bent a few valves when the motor was destroyed and that was another $300.
Hope this helps!!
