Lightning

Post your dyno/timeslips

Thread Tools
 
Search this Thread
 
Old Nov 21, 2003 | 11:30 AM
  #1  
Unoid's Avatar
Thread Starter
|
Senior Member
Joined: May 2002
Posts: 1,634
Likes: 0
From: Hobart, IN
Post your dyno/timeslips

Howdy, I'd like to see some dyno's and timeslips from lightly modded L's. That meaning other L's with similar mods to mine.

basic + few others. Thanks
 
Reply
Old Nov 21, 2003 | 12:07 PM
  #2  
ShaneMcKenna203's Avatar
Senior Member
Joined: Sep 2002
Posts: 2,501
Likes: 0
From: Plainfield, Illinois

That was last spring when I had a 4# lower, diablo chip, ftvb and silver bullet. I was running an 80mm pro m mass air. I ran the 12.7 on f1's and the 12.6's were on a nitto drag radial.
Shane
 
Reply
Old Nov 21, 2003 | 01:05 PM
  #3  
mrinaldi's Avatar
Senior Member
Joined: Jul 2002
Posts: 512
Likes: 0
From: Rahway, NJ
Unoid.....

I don't have any of my timeslips or dyno sheets available to post, but I can tell you that with the following mods, and a JDM tune, I dynoed on a good air, cold day last january at 424/556....

Mods are:
Down Ford CAI
Superchip/single/JDM tune
4lb lower
1lb upper
Single blade TB
Breather
Denso IT22's
Stock exhaust
No e-fan or waterpump

See my sig for best times....In full street trim, no weight taken out the truck turns consistent 12.60's-12.80's @ 109/110 mph.....
 
Reply
Old Nov 21, 2003 | 03:16 PM
  #4  
Rob_02Lightning's Avatar
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
This 12 was done with home made Air Filter + Box
4lb Pulley, + RWTD Chip. On F-1's using pump gas.



This one is same as above w/ added Accu-Fab, Multi Spark, Slicks



I should note I have a much more aggresive tune now
and will run faster

OF COURSE THESE ARE WITH NO JUICE
 
Reply
Old Nov 21, 2003 | 03:19 PM
  #5  
Rob_02Lightning's Avatar
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
add 65 HP of juice to above tune and
#66


Add 2lbs of pulley (4 lower + 2upper) + 10more Juice HP (75)



Lots of other slips here 12.2's, 3's, 5's, etc....
https://www.f150online.com/galleries...w.cfm?num=2331
 
Reply




All times are GMT -4. The time now is 05:05 PM.