lowering
lowering
I want to lower my truck but want to go with a 3/4 drop dose that mean i need to do a 4/5 th drop on a regular truck or a 3/4 drop on a regular truck also all i wont to do is change my front springs and rear shackels. I really like DJY1's drop but dont wont to cut anything i just wonted sonething i could do my self. also im rolling on harley 20" rims
thanks'
Justin
thanks'
Justin
My 2001 L also is running on a set of HD rims I got as a gift from my friend. I have them wrapped with Pirelli Scorpion Zeros (305/45/20). My L has the Belltech rear shackles and the Roush drop springs with Doestch tech shocks all around. I say the front has been dropped maybe 1 1/2" to about 2" and the rear is about 2" drop. Overall it gives the L a nice stance and is not too low. The L now corners a whole lot better and the ride is kinda stiff. Here is a pic of my L with the new setup:

--------------------------------

--------------------------------
Justin, Regular F-150's do not come lowered 1 inch around like Lightnings. You are correct say you went with a Bell Tech 3/4 kit which is designed for Standard F-150's you are only getting a 2/3 drop. You should just buy the Sport Truck Direct 4/5 kit made for a Standard F-150 in order to get the 3/4 drop. You might have a hard time taking off the rivets on the rear Hangers they were a pain without a Air Chisel! If all you want to do is change your front coils and rear Shackels you will get a 2/2 drop my friend just did the Ground Force 2/2 kit made for a F-150 with just Coils and Shackles and his Lightning looks a little lower but not Slammed!
djy
djy
My truck has the Ground Force for the stander f-150 3/4 kit. The only problem is that my truck bottoms out on the shocks, so I have been trying to figure out how to fix this. I only had this truck 2 months.
Originally posted by DJY1
Jkstang78, I hope you are not using the Stock Shocks! Are you sure your rear end is not bottoming out on the frame?
djy
Jkstang78, I hope you are not using the Stock Shocks! Are you sure your rear end is not bottoming out on the frame?
djy
Trending Topics
Originally posted by Jkstang78
My truck has the Ground Force for the stander f-150 3/4 kit. The only problem is that my truck bottoms out on the shocks, so I have been trying to figure out how to fix this. I only had this truck 2 months.
My truck has the Ground Force for the stander f-150 3/4 kit. The only problem is that my truck bottoms out on the shocks, so I have been trying to figure out how to fix this. I only had this truck 2 months.
Originally posted by LightningCT
Aside from the bottoming out, how does it handle...?? I'm interested in a drop, not sure which though....not necessarily for looks, but for cornering, etc...
Aside from the bottoming out, how does it handle...?? I'm interested in a drop, not sure which though....not necessarily for looks, but for cornering, etc...
Originally posted by player19
get the lower shock mount extenders from so-cal speedshop---- will recover about two inches of shock travel-- I have the roush kit with two inch belltech and needed them for the shocks
get the lower shock mount extenders from so-cal speedshop---- will recover about two inches of shock travel-- I have the roush kit with two inch belltech and needed them for the shocks
Originally posted by Jkstang78
My truck has the Ground Force for the stander f-150 3/4 kit. The only problem is that my truck bottoms out on the shocks, so I have been trying to figure out how to fix this. I only had this truck 2 months.
My truck has the Ground Force for the stander f-150 3/4 kit. The only problem is that my truck bottoms out on the shocks, so I have been trying to figure out how to fix this. I only had this truck 2 months.
do you have any more pics of your L with the drop? From the looks of the pic in your sig thats the exact drop im looking for.


