Installed the Diable chip with 2 programs last night. After installing it the truck would only start in the stock setting. I tried several times to start it in program one and 2 but it would not turn over. I started it in stock then flipped it over and ran the truck. Now it starts in all modes after driving around for a while. Just wanted to make sure that I did not screw anything up.

Also, can I just flip from one program to another while the car is running or do I have to restart it?

Thanks for the help.

 

Yes, you can switch from one program to the other while on the fly, but if you want to switch to the stock setting you need to turn your L off, flip it to stock setting then turn your L back on for stock settings to operate.

When you turn your L off, and then switch to one of the other two programs (other than stock) does it start ?

D-Day