Finally got my sparco seats installed
Senior Member
Joined: Dec 2000
Posts: 3,451
Likes: 0
From: Portland, Oregon. USA
Thread Starter
|
Senior Member
Joined: Jul 2001
Posts: 5,592
Likes: 0
From: Nashville
I have to see if Bristol is the same day as the sport truck shoot out. If it isn't the same day I might make bristol.
Thanks for the camera mount links.
For the seats you need
1-#1123 (passengerseat bracket)
1-#1122 (driver seat bracket)
2-#500SM (bracket adapters)
2-#00493 (sliders)
I had to cut a small hole in the carpet on the passenger side and pull out the rubber plug which is in the hole. I tapped the hole the same size thread as the stock bolt. Everything was simple, except the sliders were difficult to bend and have everything work correctly. I figured it out eventually and it works great.
Thanks for the camera mount links.
For the seats you need
1-#1123 (passengerseat bracket)
1-#1122 (driver seat bracket)
2-#500SM (bracket adapters)
2-#00493 (sliders)
I had to cut a small hole in the carpet on the passenger side and pull out the rubber plug which is in the hole. I tapped the hole the same size thread as the stock bolt. Everything was simple, except the sliders were difficult to bend and have everything work correctly. I figured it out eventually and it works great.
Senior Member
Joined: Jan 2000
Posts: 2,357
Likes: 0
From: Ventura, CA, USA
Originally posted by easterisland
I have to see if Bristol is the same day as the sport truck shoot out. If it isn't the same day I might make bristol.
Thanks for the camera mount links.
For the seats you need
1-#1123 (passengerseat bracket)
1-#1122 (driver seat bracket)
2-#500SM (bracket adapters)
2-#00493 (sliders)
I had to cut a small hole in the carpet on the passenger side and pull out the rubber plug which is in the hole. I tapped the hole the same size thread as the stock bolt. Everything was simple, except the sliders were difficult to bend and have everything work correctly. I figured it out eventually and it works great.
I have to see if Bristol is the same day as the sport truck shoot out. If it isn't the same day I might make bristol.
Thanks for the camera mount links.
For the seats you need
1-#1123 (passengerseat bracket)
1-#1122 (driver seat bracket)
2-#500SM (bracket adapters)
2-#00493 (sliders)
I had to cut a small hole in the carpet on the passenger side and pull out the rubber plug which is in the hole. I tapped the hole the same size thread as the stock bolt. Everything was simple, except the sliders were difficult to bend and have everything work correctly. I figured it out eventually and it works great.
Banned
Joined: Jun 2002
Posts: 3,508
Likes: 0
From: Huntington Beach/CA
Originally posted by AutoPCSystems
auto pc comes with a webcam mount! and there is no need for a laptop bracket either!
auto pc comes with a webcam mount! and there is no need for a laptop bracket either!
Can they be overclocked to Barton 3200+ specs and water cooled? The webcams still have poor res for recording.
Thread Starter
|
Senior Member
Joined: Jul 2001
Posts: 5,592
Likes: 0
From: Nashville
Looks like I'll be going to the www.sporttruckshootout.com
List of registered participants(I'm the only one?)
Sign up page
I went two years ago and it was lot's of fun. I went to Bristol last year. I think the www.sporttruckshootout.com is a great event.
List of registered participants(I'm the only one?)
Sign up page
I went two years ago and it was lot's of fun. I went to Bristol last year. I think the www.sporttruckshootout.com is a great event.
Registered User
Joined: Sep 2002
Posts: 288
Likes: 0
From: Alabama
Originally posted by SVT_KY
My Porsche buddy has a suction cup one that goes on the
windshield ... It is ROCK solid and VIBRATION proof. I will
ask him who made it ... I was gonna use it at Putnam, but
they wouldn't let a rookie take pictures...... <grin>
Hama Universal Video Camera Mount, $94.95 from I/O Port Racing Supplies, 800-949-5712.
http://www.ioportracing.com/Merchant...tegory_Code=CM
Cliff
My Porsche buddy has a suction cup one that goes on the
windshield ... It is ROCK solid and VIBRATION proof. I will
ask him who made it ... I was gonna use it at Putnam, but
they wouldn't let a rookie take pictures...... <grin>
Hama Universal Video Camera Mount, $94.95 from I/O Port Racing Supplies, 800-949-5712.
http://www.ioportracing.com/Merchant...tegory_Code=CM
Cliff
