...JLP 4" Drop Shackles INSTALLED!!...
I'm ordering the 2-3-4" shackles next week to replace my belltech 2" shackles after i get my 1" front drop springs in.
Realistically i'll never get 4" back there from shackles, there's just not enough room between there and the bed, but i'm hoping it'll end up being a true 3" shackle, or at least an inch more than the 1-3/4" i've got now.
Realistically i'll never get 4" back there from shackles, there's just not enough room between there and the bed, but i'm hoping it'll end up being a true 3" shackle, or at least an inch more than the 1-3/4" i've got now.
Originally posted by Krix330cic(NJ)
damn, just took all these pics, and STILL NO DAMN OPTION ON THIS FORUM TO POST ATTACHMENTS!!!!!
btw - we also need some more pissed off SMILEYS, enough with this cheery happy crap!
damn, just took all these pics, and STILL NO DAMN OPTION ON THIS FORUM TO POST ATTACHMENTS!!!!!
btw - we also need some more pissed off SMILEYS, enough with this cheery happy crap!
--Joe
Originally posted by SpankDog
Yea its called image galleries and then IMG links....
Yea its called image galleries and then IMG links....
sorry, not gona upload pics then cut and paste links, they need to get with the program around here.
bad day at work, Kris???????????hehe
I wonder about that "wandering axle" feeling too, from those long shackles, but I guess the Harley boys don't corner like the Lightning boys do
I bet Ruslows panhard bar would correct that
I wonder about that "wandering axle" feeling too, from those long shackles, but I guess the Harley boys don't corner like the Lightning boys do
I bet Ruslows panhard bar would correct that
Originally posted by Red BOLT99
So the bottom line .
JLP's 2,3,4 drop shakles don't give you that amout of a drop?
I was gonna order two Pairs but there not giving the actual drop correct? Frank
So the bottom line .
JLP's 2,3,4 drop shakles don't give you that amout of a drop?
I was gonna order two Pairs but there not giving the actual drop correct? Frank
No drop kits lightning or not are measured by how low any said place on a vehicle lowers.It done by how many inches the holes in the said part(shackles,hangers,spindles......ECT) is different from the factory holes.And for springs and such,They are basically measure to match with other components which are measurable.
If anybody thinks thay are going to get anywhere near 4" drop from a shackle they are dead wrong.The holes might line up4" apart but thats the end of it.FYI
There are many things that do not allow for a true drop like angles, radius ,weight transfer ,and such
If anybody thinks thay are going to get anywhere near 4" drop from a shackle they are dead wrong.The holes might line up4" apart but thats the end of it.FYI
There are many things that do not allow for a true drop like angles, radius ,weight transfer ,and such


