Can anyone give me an estimated 1/4mile with these mods and setup on my L? What do you all think? Thanx guys!

2002 Lightning w/ SnugLid hard tonneau and Goodyear F1's
-Accufab Throttle body
-REM Cold Air Intake
-Diablo Delta Chip
-Boost Bypass Mod

 

ummmmm 13.25 or so ....

 

Hard to say without knowing how agresive the chip is tuned, but I will guess 13.2 @102 mph

 

13.2's? Man! I was hoping for the 12 second club....

 

No chance at 12's with those mods.

 

Hmmm....What about with a 4# Pulley added???

 

Let me guess ... Have you been told "A chip and a pulley and
you will be into the 12's, maybe even MID 12's " ???

Sorry to break your bubble bud, but after $5,000 of mods
a sixty foot of 1.89 I am still sitting at 13.02 !!!

 

Yea...thats what I heard and figured....

 

That should get you into the 12's

 

Wow SVT_KY If I spend $5000.00 and still in 13's I would be pissed and start looking for a new tuner or maybe just pull the 1000 lbs of sand out of the bed whats up with $5000.00? sometning isnt right.

 

wow.. i guess i'm lucky. i got into the 12's with a 2lb lower pulley.

60 degree day:
60ft: 1.887
1/8mi: 8.271
mph: 85.06
1/4mi: 12.952
mph: 104.61

mods at the time:
PSP 4 way chip (race program)
PSP 2lb pulley
JL driveshaft loop
Airaid intake kit
valve cover breather (drivers side)
magnaflow muffler
FT shift kit & 4x4 pan
SVO single bore throttle body
JDM traction bars
Denso IT20 spark plugs



(i now have a 4lb pulley & i ran a 12.7 @ 106)

 

Something Aint right if you spent 5K on mods and are running 13's either it is a uphill 1/4 mile or your truck is just really slow ( no offense) or the track you run at is like an ice rink ( where are you running)
I ran a 13.334 stock in the cool weather @ E-town in NJ and there were pleanty of trucks running mid-low 12's with just a few mods...juice not being any of them
I think you have a problem somewhere.....

Good luck
SLick

 

No assurances that will be a 12 Sec

 

Like Brooks I got into the 12's with a 2# pulley.
( I ran 13.0x about 30 tiimes before I made it but I made it )

As a matter of fact I went 12.52 with a 2# pulley...

I know no one will believe it but its true.
I went 12.28 with a 4# pulley. Both were with VERY mild tunes on the chips.

The pictures, details, dyno etc are on my website. The 12.52 was at Cecil and the 12.28 was at Hallsville here in Texas.

The issue with these trucks is traction and weather. You could have all the mods in the world and not get good times if the track is not sticking. To get LOW in the 12's you need to get LOW in the 1.8 60 foots. If you cant get low 1.8 or 1,7 60 foots you are either over powering the track at launch or the track just wont hook .... And The track has to be decent down track as well.. I have lost ET at mid track from spinning..

Doug

 

I agree with Doug

SLick