""""I MEANT TPS NOT IAC, SORRY""""


For the Nitrous Wiring, I must connect one white wire to the output voltage lead from the throttle position sensor.

Does anyone know which wire that is on the TPS plug ???

 

Rob: You're confusing me--is it the TPS or the IAC? I bet you mean TPS? Still d/k the wire answer.

Dan

 

Sorry Lightnin Rod,
Yes I mean TPS,
I edited it,
THANKS

Maybe I can answer my own question
I adjusted my TPS 2 weeks ago


Would I be correct in saying since the red lead of the meter went to the Middle wire of the TPS, that must be the Output Voltage RIGHT ????

Sounds Right to me

 

take a digital multimeter, set to dc volts

back plug (red)it into one of the hole, black to ground

open the throttle

if it changes voltage thats the output voltage

switch holes if not.

 

well i decided to see what my babolt t/b's TBS was set at, since i read this.

it was at .958, so i fixed it to .982

thanks rob, i finally got off my butt after seeing that picture.

that should have been on my things to do to the truck list a long time ago.

 

i prefer mine set to .98