And tighter......not like that crappy ghetto sound of bandpass boxes.

We all like tight

--Joe

 

you wouldn't if your sub was 12 inches....AROUND!! (american pie II rawks!!)

joe: how much do you charge per hour???

 

HEHEH I don't go by the hour brother cause it would cost you a million bucks on a day like today. I feel like ***** with the flu or the cold, I don't know but there goes my throat again!!!!!!!!!!

Depending on the box it varies from what you want done to what you want it covered with.

Soap, yeah these play very very tight and deep at the same time. I like them better then my W3's I had before.

 

HEY RT

THE LOOK GOOD..........

figured I might as well get use to yelling at you, so you can hear me

And I know what you mean by working all day, been in the garage since 10 this morning, I've had enough for one day

 

Joe,

I was actually talkin about the door panels. Close your door once and look where they end up in relation to your seat back. Mine filled to both sides of the truck (had about 1.5 inches between the back speakers and the box on either side with the rear plastic removed. (remember i retained a 24" spot in the middle for amps though) so yours might not actually be as long as mine was. I had to stagger the subs to accomodate the space i had. What i did find out was that more is not always better, aparently 4 subs in our trucks creates a pretty aweful null. I went to 2 subs and it was nearly as loud and sounded better, then i went to 3 and it still soudned better, maybe 5 might be the trick =) Been toying with teh idea of two 15's =).. Unfortunatly 99% of the quality subs are way too deep for it. Soo maybe 4 12's this time =) or 3 12's we will see, I am wondering where you are putting the amps thjough. Going up high above the subs? I want something a tad more stealthy =)

Brandon

 

I'm going to mount the amps under the seats for a stealthy look that you speak of.

Right now I'm so high from the fumes of bondo and caulk! this is great, back to the garage.

 

OMG RT is the master of wood working!

 

I love those dogs . Also might I suggest you take out the passenger glvoe box and mount a 10" there as well

 

Thats not a bad idea! HEHEHEHE, or alteast mount another playstation there when I get the new kenwood radio I want, HEHEHE

 

Well I got the box pre fit in the truck and its perfect, I even got room to spare, but I'll use it up with dynamatt and carpet now. HEHEHEHE.

http://www.finishlinecycles.com/foru...s=&postid=9057

http://www.finishlinecycles.com/foru...s=&postid=9054

http://www.finishlinecycles.com/foru...s=&postid=9056

 

find any spare change under the carpet or seats

 

I found like 2 bucks actually!

 

Ok I'm done for today, started the dynamatt and got about half way done with it. The fumes from the past two days are getting to me now. time to sleep!

 

I've come up with a great idea rtk, The ultimate scare off the ricer tactic for you would be to record the sound of your eaton screaming from low rpms to high in high quality. Burn cd with it and crank the stereo up. Will sounds like you're running a 10L with 35PSi sc

PS: what kind of dogs are those? They looks so great.
PS #2: I love that pic of your truck outside the warehouse. If only it was zoomed in at 1600x1280 res, that Lighting is perfect.

 

this man is insane. But thanks for the pics, im building a box for my xtra cab soon so i have a little better idea what im gettin into. but, damn, 5 10's? . . . .speechless