Lightning

Plug color

Thread Tools
 
Search this Thread
 
Old Jan 23, 2003 | 02:44 PM
  #1  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
Plug color

I pulled the front 2 plugs on each side last night and they were all white no green just white. My truck is stock for a few days i have had a 4lb pulley and chip in it but they have been off for a week or so.Why would my truck be running lean on thge stock program and pully?I hope its not the fuel filter.
 
Reply
Old Jan 23, 2003 | 02:52 PM
  #2  
Rob_02Lightning's Avatar
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
What Plugs you running ???
People will disagree but my Stock plugs ran cooler than my TR-6's, even with 6 extra lb's of Pulley Boost

Stock plugs after driving it like I stole it for weeks with a 4lb lower and a 2-3 lb upper


Now the TR-6's with the same tune after a few hundred miles

 
Reply
Old Jan 23, 2003 | 02:54 PM
  #3  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
tr-6 beacuse i usaully have my 4lber on
 
Reply
Old Jan 23, 2003 | 03:06 PM
  #4  
RTKILLA's Avatar
Senior Member
Joined: Nov 2000
Posts: 6,713
Likes: 0
From: Orland Park, IL just south of chicago
I've been running TR6's with a 4lb lower and 2lb upper for awhile now and its holding up good for me, I'm happy with the results.
 
Reply
Old Jan 23, 2003 | 07:03 PM
  #5  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
nobaody have any ideas what could be wrong?
 
Reply
Old Jan 23, 2003 | 07:15 PM
  #6  
whitetoast11's Avatar
Senior Member
Joined: Aug 2001
Posts: 1,516
Likes: 0
why would you hope its not the fuel filter, thats like a $8 five minute fix ya know.

~Toast
 
Reply
Old Jan 23, 2003 | 07:17 PM
  #7  
LIGHTNINROD's Avatar
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
This cold weather may have leaned your a/f ratios a little. If they're not blistered or the electrodes aren't eroded, I wouldn't be too concerned.

Dan
 
Reply
Old Jan 24, 2003 | 08:37 AM
  #8  
LatemodelRacer2's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
I sat up last night thinking about why it would be lean and i could only come up with one thing that i had left the driver side vent tube loose from the valve cover when i was uninstalling my throltle body the other day.Just wenty outdside and shure enough it was off. Could this be causing it to be lean?
 
Reply




All times are GMT -4. The time now is 11:32 PM.