FYI - Check Your Rear Window Molding
I took it in today, and they said they could not do anything about the seal and ordered a new part. Must be the new seal. Thanks for the encouragement. It's a bit of a hassle, but in the long run I'll be glad I did it.
Mine sticks out above driver's head. Doesn't leak (yet). Kinda like the front grill meeting the hood. Not exactly "fitted right" but I'm just going to deal with it.
Usually when I start taking stuff in for work, she's all down hill w/ that vehicle from then on.
Usually when I start taking stuff in for work, she's all down hill w/ that vehicle from then on.
Thanks to this thread I knew what I was talking about, knew what i was looking or and knew what to ask for. I now have a new rear sliding window with the new seal. It's straight with no buldges and looks good.
Thanks for the assistance.
Thanks for the assistance.
Originally posted by Rob_02Lightning
Mines ****ed too
Looks Schitty, not leaking YET
But Ford will never lay a hand on my L
EVER
So I guess I del with it like the other screwed up moldings
Mines ****ed too
Looks Schitty, not leaking YET
But Ford will never lay a hand on my L
EVER
So I guess I del with it like the other screwed up moldings
Took my 02 in for same prob. Tech smeared yellow weatherstrip adhesive all over and called it fixed-looked worse than before
So I took it back,yelled alot, and they finally decided to order me a new seal. Turns out the old seal is scrapped and they only replace w/new seal(03). The best part- they had the new seal in stock all along-A-holes
Ford=good trucks;crappy service now I hope they can get the yellow goo off everything-idiots
So I took it back,yelled alot, and they finally decided to order me a new seal. Turns out the old seal is scrapped and they only replace w/new seal(03). The best part- they had the new seal in stock all along-A-holes
Ford=good trucks;crappy service now I hope they can get the yellow goo off everything-idiots
Originally posted by Crazyone
Well mines been replaced 3 times so far, and still looks like ShTT. Moulding does not fit in correctly, and seal is squished. Turns out the water leak on mine was rear of cab seam was split and leaking. They had to pull bed and all the other stuff and weld/reseal it =/
Brandon
Well mines been replaced 3 times so far, and still looks like ShTT. Moulding does not fit in correctly, and seal is squished. Turns out the water leak on mine was rear of cab seam was split and leaking. They had to pull bed and all the other stuff and weld/reseal it =/
Brandon
my 99 f150 i replaced 2 times and was waiting for the third but trafed it for my L


