King Ranch

2001 Tailgate badge?

Thread Tools
 
Search this Thread
 
Old May 25, 2008 | 10:26 PM
  #1  
jfgardner4's Avatar
Thread Starter
|
Junior Member
Joined: May 2008
Posts: 27
Likes: 0
2001 Tailgate badge?

I picked up the 2001 KR today. Rides great. gonna let the shop check it out real close on Tuesday morning.

The tailgate KR badge was missing. The F150 badge is there, but the KR logo is gone. Where can I get another one and how is the best way to stick it on?

Thanks in advance.
 
Reply
Old May 26, 2008 | 05:09 AM
  #2  
Lenticular's Avatar
Senior Member
Joined: Nov 2001
Posts: 2,573
Likes: 0
From: Rio Grande Valley, Tx and the United Kingdom.
They often appear on EBay, and good quality double sided adhesive tape will do the trick. (The thicker, slightly 'spongy' type)
 
Reply
Old May 26, 2008 | 09:02 AM
  #3  
jfgardner4's Avatar
Thread Starter
|
Junior Member
Joined: May 2008
Posts: 27
Likes: 0
I checked there first. I did not se any, but i might not have searched correctly.
 
Reply
Old May 26, 2008 | 02:21 PM
  #4  
Rockpick's Avatar
Moderator &
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
Early production KR's did *NOT* have the flat King Ranch tailgate emblem... I know this because my 01' didn't have it.

Do a tidbit of searching here in the KR forum and you'll find the KR Badge part number. It *is* different than the fender badge in that it's flatter...
 
Reply
Old May 26, 2008 | 02:26 PM
  #5  
Rockpick's Avatar
Moderator &
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
Here you go...

Part Number: 2L3Z-1842528-AAA

I believe I snared mine from www.fastpartsnetwork.com

Price is around $25 (maybe more now -- that was a 2003 post that I dug up).

It *will* mount into the same mounting holes that the F150 emblem mounts in to...

Careful removing your old one... you can scratch the paint pretty easily and the new KR tailgate badge won't conceal the scratches.

I would suggest using heat and fishing line to gently remove it... again, a quick search for "tailgate emblem" or the part number above in the KR forum only will yield some great info... this was covered pretty well about 5 or 6 years ago..

Enjoy!

-RP-



I started with this... that is a fender badge trimmed of the 'F150' portion and then 'stuck' to the paint above the F150 emblem that you speak of...

Then I went to this...

 

Last edited by Rockpick; May 26, 2008 at 02:30 PM.
Reply




All times are GMT -4. The time now is 01:04 AM.