Introduction Forum Introduce yourself to the Community here! If you have a technical question, try posting it in the appropriate forum.

Hello

Thread Tools
 
Search this Thread
 
Old Mar 26, 2019 | 09:25 PM
  #1  
Smitty06KR's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2019
Posts: 6
Likes: 0
From: Missouri
Hello

Hello my name is Ishmael, reporting from St.Louis Missouri
 
Reply
Old Mar 27, 2019 | 12:25 AM
  #2  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Welcome to the site. Tell us about your truck.
 
__________________
Jim
Reply
Old Mar 27, 2019 | 07:57 AM
  #3  
Smitty06KR's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2019
Posts: 6
Likes: 0
From: Missouri
King ranch

06 Kin ranch 5.4L.
So I was driving home and all of a sudden my truck cut off. I managed to pull to the side of the road and tried starting the truck back up. It started up but once I put it in drive and pressed the gas it cut off. Tried the same thing again and got the same results. After sitting for about 10mins I just turned the key over to notice if any lights were on. I noticed that the old pressure was reading low. I walked to dollar general and purchased some oil. I put 3quarts in and still reads low oil pressure and won’t start. Any ideas. I don’t know if it’s fuel related or oil related.
 
Reply
Old Mar 27, 2019 | 09:43 AM
  #4  
ManualF150's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
It might be the VCT system or else something broke because the lack of oil. 3 quarts is a considerable amount of oil, especially for how that particular engine relies on proper oil levels.
 
Reply
Old Mar 27, 2019 | 09:45 AM
  #5  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,542
Likes: 819
From: Joplin MO
Originally Posted by ManualF150
It might be the VCT system or else something broke because the lack of oil. 3 quarts is a considerable amount of oil, especially for how that particular engine relies on proper oil levels.
Question has been asked in a new thread.
 
Reply
Old Mar 27, 2019 | 08:03 PM
  #6  
Smitty06KR's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2019
Posts: 6
Likes: 0
From: Missouri
Replaced the vct solenoids

Still won’t start. Oil hands jumps to half way point then drops back down to none
 
Reply




All times are GMT -4. The time now is 04:42 AM.