new HU

  #1  
Old 09-15-2009 | 09:16 PM
crums440's Avatar
Thread Starter
|
Senior Member
Joined: May 2009
Posts: 189
Likes: 0
From: Maple Grove MN
HELP!!! new HU

alright so i had all the wires set up right, i turned the key and the deck lit up and then one of the wires was sticking out barely and touched the back of the deck, (which is metal) and then it all of a sudden went black again, so idk wat to do, i tryed pulling it out and plugging it back in, i checked the fuse, even though idk if it may have burnt up, hard to tell in the dark, so if anybody has any idea please let me know, i am hoping that i didnt blow the whole deck up. so any ideas would be great, thanks,
 

Last edited by crums440; 09-15-2009 at 09:18 PM.
  #2  
Old 09-18-2009 | 01:41 PM
Saint83's Avatar
Member
Joined: Sep 2009
Posts: 35
Likes: 0
From: Nashville TN
did you check the radio fuse from the truck?
 
  #3  
Old 09-18-2009 | 02:49 PM
Sundevil2188's Avatar
Senior Member
Joined: Aug 2007
Posts: 2,441
Likes: 0
From: Scottsdale, Arizona
You grounded it out and blew a fuse somewhere.

And obviously you didnt have it wired up all right if one of the wires was "sticking out"
 
  #4  
Old 09-18-2009 | 03:28 PM
Saint83's Avatar
Member
Joined: Sep 2009
Posts: 35
Likes: 0
From: Nashville TN
Originally Posted by Sundevil2188
You grounded it out and blew a fuse somewhere.

And obviously you didnt have it wired up all right if one of the wires was "sticking out"
Agree, anytime i work with wires i either use but connectors, or solder and cover with a sleeve.
 


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:58 PM.