Ok, I just got off the phone with Todd at PJ1. The correct application for our trucks (and all other non motorcycle apps) is 12oz. per 4in of tread. So the approx. tread width for our truck (275 45 22) is 12inches, which means you need 36 oz. (3 12oz. bottles) per tire.

I have used this stuff for 7+ years and I swear to you this stuff is the best.

When I went from spoked wheels to tubeless wheels, I just took the tube(with the PJ1 in it) out of 1 tire and put the tube in my tubeless tire. I used that same tube for 3 tires before it got a nail in it...lol....since it didnt blowout(or go completely flat), all I did was take the tire off, hose it off, put another tube in it, add PJ1 and continue on my trip without having to spring for another tire. If it had gone flat the tire would have been wasted along with my rims.....maybe my butt too. I still use a tube in my tubeless tires.


If you have alot of vehicles you might want to buy it by the 5gal pail that also comes with metal pump that pumps specified amounts. PJ1 part # for 12oz. bottles is 21-12, the 5gal.pail is 21-752/pump M. These can be ordered at almost any dirtbike/4 wheeler dealer.

 

bump