Harley-Davidson

Plug Gap?

Thread Tools
 
Search this Thread
 
Old Sep 24, 2002 | 05:00 PM
  #1  
K-Man18's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 37
Likes: 0
From: KC
Plug Gap?

Hi all, I just orderd some new plugs for my HD 02, NGK TR 6s. I am running a 6 lb lower, superchip flip chip and a air force one. Could someone tell me what the correct gap on the plugs for this setup would be? Thanks
 
Reply
Old Sep 24, 2002 | 10:45 PM
  #2  
flyarmy's Avatar
Member
Joined: Jul 2002
Posts: 72
Likes: 0
From: FT. Rucker, AL
I was told 40 thousandths when I ordered my 6# and Denso's today
 
Reply
Old Sep 25, 2002 | 05:20 AM
  #3  
K-Man18's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 37
Likes: 0
From: KC
flyarmy, thanks for the info.
 
Reply
Old Sep 26, 2002 | 12:47 PM
  #4  
terry bean's Avatar
Member
Joined: Jul 2002
Posts: 59
Likes: 0
From: Canada
Plug Gap

K-Man
You have almost exactly the same set up as mine. 6#, Superchip flip and AF1. Have you noticed your truck detonating at part throttle? Mine detonates at say 1/2 throttle when accelerating from 55 to say 70 mph. I have tried every brand of fuel available without success. Does your truck do this? Get your speed to 55-60 mph and then accelerate as fast as you can without downshifting a gear-this is when I hear the rattle. BTW I get no rattle on the "bad gas" setting, it is just a bit slower.
 
Reply
Old Sep 27, 2002 | 07:04 AM
  #5  
K-Man18's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 37
Likes: 0
From: KC
terry bean, there have been a few times when I could hear a little rattle. Hoping these new plugs will help. I will let you know. BTW I am installing them this weekend.
 
Reply




All times are GMT -4. The time now is 11:25 AM.