torque converters
Senior Member
Joined: Jun 2001
Posts: 999
Likes: 0
From: Houston, tx
I have considered this one... Check this thread:
https://www.f150online.com/forums/sh...highlight=Carr
If I was going to do it, I would try to stall at 2200 to 2400 so that my daily driveability is not messed up...
I would go with traction devices and 4.10 gears before the TC. I have researched this one for quite a while and it doesn't sound worth it...
It seems the only one that is going to really work well is the P.I. which is $1000. You can get 4.10s and caltracs or something similar for less...
https://www.f150online.com/forums/sh...highlight=Carr
If I was going to do it, I would try to stall at 2200 to 2400 so that my daily driveability is not messed up...
I would go with traction devices and 4.10 gears before the TC. I have researched this one for quite a while and it doesn't sound worth it...
It seems the only one that is going to really work well is the P.I. which is $1000. You can get 4.10s and caltracs or something similar for less...
Last edited by ken800; Aug 14, 2002 at 10:26 AM.
Member
Joined: Jul 2002
Posts: 93
Likes: 0
From: north carolina
T converter causing jerking on gas letup
Cobrasvt1
do you experience occasional jerking motions when letting up off gas
feels like downshifting but is not
doesnt do consistancly
am told chip causing
currently have 2002 HD with 8# lower, chip,cold air,throddle body
whats your experience
thanks for your reply
chgames
do you experience occasional jerking motions when letting up off gas
feels like downshifting but is not
doesnt do consistancly
am told chip causing
currently have 2002 HD with 8# lower, chip,cold air,throddle body
whats your experience
thanks for your reply
chgames
Senior Member
Joined: Mar 2000
Posts: 1,985
Likes: 1
From: Cincinnati, OH
A shift kit will "clean up" a lot of the weird things your tranny does.
Also, I make a coverter that's not as good as the PI (I'm honest about it), but is a big improvement over the stock unit. It's a pretty good unit, but it's not built for fullon racing like the PI, I designed it for people who want something better than stock but don't have 900 lbs of torque and don't want to drop a grand on it. It goes for $525, with exchange, shipping is about $20.
Hope this helps,
G
Also, I make a coverter that's not as good as the PI (I'm honest about it), but is a big improvement over the stock unit. It's a pretty good unit, but it's not built for fullon racing like the PI, I designed it for people who want something better than stock but don't have 900 lbs of torque and don't want to drop a grand on it. It goes for $525, with exchange, shipping is about $20.
Hope this helps,
G
