Let's start over......
Nope!!! This is not the job working in the A/C. I've never heard anything else from them so I went on to something else. Just 18 miles from my house.
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Some reason I was thinking this place had air conditioning too.
Na!!! I'll be working mostly outside. But the pay is good. Also be saving around 400 a month in gas too.
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Thanks Randall!! Yeah I know I missed the foot pads on purpose, I am thinking about using the bed liner again and it's just easier to get it back down to bare metal that way.
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Oh, I haven't started working on the underside yet. Thats all getting ground off and sprayed with undercoating.
Senior Member
Joined: Sep 2005
Posts: 3,017
Likes: 2
From: Decatur,AL
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
I know some of that was the paint fumes talking...... It's something that I am enjoying a little more than I thought I would and I am already looking for the next one to do.
It's something that I am enjoying a little more than I thought I would and I am already looking for the next one to do.
Senior Member
Joined: Sep 2005
Posts: 3,017
Likes: 2
From: Decatur,AL
Just thought I would give it a try. But it wont be what I'll buy from here on out. Will be going back to my BudLite tomorrow.
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
jbrew is going to luv this>>>https://www.f150online.com/forums/an...nt.php?f=&a=76
Can't even pay me to put those in a vehicle......let alone give them away
Can't even pay me to put those in a vehicle......let alone give them away
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Thank's Ian. I was serious though, I need to replace the cartidges on my repserator. I could taste the paint at the end when I was finisihing up the first coat of green. I am not feeling the greatest right now.....
I was serious though, I need to replace the cartidges on my repserator. I could taste the paint at the end when I was finisihing up the first coat of green. I am not feeling the greatest right now.....
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Yea, I seen that. Honestly, it's a new breed so who knows. (?) The worst Bosch Plugs were those plus fours. They would heat up and fall apart inside the cylinder. It wasn't just the fours either. A friend of mine from this site bought a used engine for a project motor. Had the normal type of Bosch plugs in it. Pulled the head and found that the plug fell apart an took out the valve. 1/3 of the valve broke off. There's pics on this site.