F150online Forums

Let's start over......

Thread Tools
 
Search this Thread
 
Old Aug 2, 2011 | 09:17 PM
Share
  #64306  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
Originally Posted by Patman03SprCrw
what kind of computer system runs it, or is it carbed?

it could be a water temp sensor, or MAP sensor originally as well. MAPs are usually mounted on the back of the manifold like that. It could be a newer 454 that was FI with a MAP and converted to Carb.




Stupid hot today, gonna be stupid hot tomorrow.
Its a carbed motor, the fuely's didnt come out till later in these boats. I thought it to be a sensor once apon a time but the location doesnt make sense. There is nothing to measure/read there.
 
Reply
0
Old Aug 2, 2011 | 09:20 PM
Share
  #64307  
6"_isnt_enough's Avatar
Senior Member
Joined: Feb 2010
Posts: 458
Likes: 0
From: latrobe, pa
matt wat inlays did u get for your badges?
 
Reply
0
Old Aug 2, 2011 | 09:23 PM
Share
  #64308  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 158
From: DFW
Originally Posted by shifty219
Its a carbed motor, the fuely's didnt come out till later in these boats. I thought it to be a sensor once apon a time but the location doesnt make sense. There is nothing to measure/read there.
MAP sensors are usually on the back side of the intake, maybe a knock sensor?
 
Reply
0
Old Aug 2, 2011 | 09:37 PM
Share
  #64309  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
I dont think it would be any kind of sensor. The motor is as basic as you can get, no computer
 
Reply
0
Old Aug 3, 2011 | 06:34 AM
Share
  #64310  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
 
Reply
0
Old Aug 3, 2011 | 07:25 AM
Share
  #64311  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
 
Reply
0
Old Aug 3, 2011 | 07:27 AM
Share
  #64312  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Patman03SprCrw
Know wonder....
 
Reply
0
Old Aug 3, 2011 | 08:02 AM
Share
  #64313  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Originally Posted by Patman03SprCrw
MAP sensors are usually on the back side of the intake, maybe a knock sensor?
Originally Posted by shifty219
I dont think it would be any kind of sensor. The motor is as basic as you can get, no computer
It's the bung for the EGR, it just hit me after staring at the picture. I remember replacing the EGR on my 305 and it was in the exact same spot.
 
Reply
0
Old Aug 3, 2011 | 08:02 AM
Share
  #64314  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Morning......
 
Reply
0
Old Aug 3, 2011 | 08:22 AM
Share
  #64315  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
 
Reply
0
Old Aug 3, 2011 | 08:35 AM
Share
  #64316  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 82
From: Burleson/Athens/Brownsboro, TX
Donuts!
 
__________________
Jim
Reply
0
Old Aug 3, 2011 | 08:41 AM
Share
  #64317  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Bluejay
Donuts!
Rolls....
 
Reply
0
Old Aug 3, 2011 | 08:44 AM
Share
  #64318  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by dsq3973
It's the bung for the EGR, it just hit me after staring at the picture. I remember replacing the EGR on my 305 and it was in the exact same spot.
I've seen alot of block off plates made and sold for them...but this is the first weld delete....
 
Reply
0
Old Aug 3, 2011 | 08:51 AM
Share
  #64319  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Originally Posted by 88racing
I've seen alot of block off plates made and sold for them...but this is the first weld delete....
You would be suprised at some of the stuff out there. Give a little bit to dig a pic of something up.......
 
Reply
0
Old Aug 3, 2011 | 08:57 AM
Share
  #64320  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Originally Posted by 88racing
I've seen alot of block off plates made and sold for them...but this is the first weld delete....
Here ya go......This is an EGR delete that came out of a supposed diesel performance shop on a 6.0.......

Name: IMG_20110105_093406.jpg Views: 57 Size: 73.6 KB

Name: IMG_20110105_093400.jpg Views: 45 Size: 35.9 KB

Name: IMG_20110105_093351.jpg Views: 35 Size: 69.2 KB
 
Last edited by dsq3973; Aug 3, 2011 at 09:00 AM.
Reply
0



Advanced Search

All times are GMT -4. The time now is 03:44 PM.