Let's start over......
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
Brake Lights
Tail lights
And Rear Reflectors
http://www.txdps.state.tx.us/vi/publ...l/chapter4.htm
Inspect for and reject if:
1. Required lamp or lamps are not present.
2. Lamp is not securely mounted to the vehicle.
3. Lamp does not emit a red or amber light which is actuated on application of the service (foot) brake.
4. Lamp is not visible from a minimum distance of 300 feet to the rear of the vehicle to which it is attached.
5. Lamp lens is painted, missing, discolored, or does not fit properly.
6. Wiring is shoddy or electrical connections are poor.
7. Lamp projects a glaring or a dazzling light.
8. Lamp is not mounted on rear of vehicle.
9. Lens is cracked or broken to the extent that a portion of the lens is missing and/or separated, permitting light from the bulb to emit through the crack or break.
1. Required lamp or lamps are not present.
2. Lamp is not securely mounted to the vehicle.
3. Lamp does not emit a red or amber light which is actuated on application of the service (foot) brake.
4. Lamp is not visible from a minimum distance of 300 feet to the rear of the vehicle to which it is attached.
5. Lamp lens is painted, missing, discolored, or does not fit properly.
6. Wiring is shoddy or electrical connections are poor.
7. Lamp projects a glaring or a dazzling light.
8. Lamp is not mounted on rear of vehicle.
9. Lens is cracked or broken to the extent that a portion of the lens is missing and/or separated, permitting light from the bulb to emit through the crack or break.
# Inspect for and reject if:
1. Required lamp or lamps are not present.
2. Lamp is not securely mounted to vehicle.
3. Lamp does not completely emit a red light plainly visible 1,000 feet to the rear.
4. Lamp lens is painted, missing, discolored, or does not fit properly.
5. Wiring is shoddy or electrical connections are poor.
6. Lamp is not wired so as to be lighted when head lamps or auxiliary driving lamps are lighted.
7. Lamp is obstructed by any part of the body.
8. Lamp does not emit a red color. (See note, pg. 4-26)
9. Lamps are not mounted on the same level and as widely spaced laterally as practicable.
10. Lamps are not mounted on rear of vehicle.
11. Lens is cracked or broken to the extent that a portion of the lens is missing and/or separated, permitting light from the bulb to emit through the crack or break.
1. Required lamp or lamps are not present.
2. Lamp is not securely mounted to vehicle.
3. Lamp does not completely emit a red light plainly visible 1,000 feet to the rear.
4. Lamp lens is painted, missing, discolored, or does not fit properly.
5. Wiring is shoddy or electrical connections are poor.
6. Lamp is not wired so as to be lighted when head lamps or auxiliary driving lamps are lighted.
7. Lamp is obstructed by any part of the body.
8. Lamp does not emit a red color. (See note, pg. 4-26)
9. Lamps are not mounted on the same level and as widely spaced laterally as practicable.
10. Lamps are not mounted on rear of vehicle.
11. Lens is cracked or broken to the extent that a portion of the lens is missing and/or separated, permitting light from the bulb to emit through the crack or break.
Inspect for and reject if:
1. Reflector is not present.
2. Reflector is not of red color.
3. Reflector is not properly and/or securely mounted to the vehicle.
4. Reflector is cracked to the extent that the reflecting ability is impaired.
5. Reflector is discolored, deteriorated, or painted.
6. Visibility distance is not as required.
7. Requirements shown on lighting diagram are not met.
1. Reflector is not present.
2. Reflector is not of red color.
3. Reflector is not properly and/or securely mounted to the vehicle.
4. Reflector is cracked to the extent that the reflecting ability is impaired.
5. Reflector is discolored, deteriorated, or painted.
6. Visibility distance is not as required.
7. Requirements shown on lighting diagram are not met.
Last edited by Patman; Jun 16, 2010 at 05:43 PM.
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Yeah I saw the whole section.
Pretty vague with regards to the 5. Lamp lens is painted, missing, discolored, or does not fit properly line.
When I'm done with mine there will be no tint on the lens where the light output or reflector is. The lens is only the area light passes through.
Pretty vague with regards to the 5. Lamp lens is painted, missing, discolored, or does not fit properly line.
When I'm done with mine there will be no tint on the lens where the light output or reflector is. The lens is only the area light passes through.
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Parents dropped by to give me my Birthday gift. Mom still buys me clothes for my Birthday. 
I did get some cash from them, and some cash from my Aunt and Uncle in Kentucky. 
Wife and kids got me World Cup 2010 for wii. That will be fun for us all.
I did get some cash from them, and some cash from my Aunt and Uncle in Kentucky. Wife and kids got me World Cup 2010 for wii. That will be fun for us all.
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
__________________
Jim
Jim
