anyone know the correct amount of turns to adjust the fuel, air mixture on the termaquad? i know that they have to be screwed all the way in to start,but cant remember how many turns out each one gets.

 

Hey foot...

First, I have no idea as to the answer to your question but, I might make the suggestion that you post this one in the ENGINES forum. I think you'll get a better response than down here in General Discussions...

and two...

I'm going to be moving up off of KY 146 in a couple of months... looks like we'll be neighbors!

 

I can't really say, but for some reason 1 1/2 turns comes to mind.

 

I'm like MROLDV8 1 1/4 to 1 1/2 turns semms right.

 

For everything you ever wanted to know about the Thermoquad but were afraid to ask go here

http://www.imperialclub.com/Repair/L.../290/cover.htm

Best of luck

 

rock pick,you should like it out here.i lived in louisvile for most of my life,but i would never want to move back to the city after being out here. i thank everyone for the info.

 

We're pretty pumped about our new house. It should be finished within a month or so... I'm definately ready to get out of the 'apartment' lifestyle.

 

footwart/Rp,

We'll all have to get together for a beer - but we'll have to do a beer run to L'ville.

runnert

 

Start out with 1.5 turns, use a vacuum guage and adjust either way until you get the most vac. reading(inches).