Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

finally

Thread Tools
 
Search this Thread
 
Old May 12, 2010 | 05:33 PM
  #1  
mud_slinger18's Avatar
Thread Starter
|
Member
Joined: Oct 2009
Posts: 82
Likes: 0
finally

Im gettingmy exhaust done this sat if I can make down to Alabama fri night.Im gonna running 3'' pipe of the Y with a 3'' si/so bullet with a Y and 3'' pipe running to either 4or6 tips 45ed behind the tires.Does anyone have any vids or sound clips with this setup?I know there are some with 2 1/2 off the Y but anyone have 3'' of the Y?
 
Reply
Old May 12, 2010 | 05:42 PM
  #2  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
That will sound good, but for cosmetics sakes, keep it 4" tips max, unless you have an 8" lift and a styleside bed, then 5" is acceptable.
 
Reply
Old May 12, 2010 | 06:12 PM
  #3  
mud_slinger18's Avatar
Thread Starter
|
Member
Joined: Oct 2009
Posts: 82
Likes: 0
yeah thats what I was thinking but you wont be able to see much of the tip.Im getting it run down at an angle so that just an inch or 2 will stick down at the corner of the bed.
 
Reply
Old May 14, 2010 | 09:56 PM
  #4  
mud_slinger18's Avatar
Thread Starter
|
Member
Joined: Oct 2009
Posts: 82
Likes: 0
Well it looks like Im gonna be held up, have to work all weekend but I have my muffler and tips and will be on as soon as I can get a weekend off.Hope it is soon I have been waiting long enough.
 
Reply
Old May 15, 2010 | 07:27 PM
  #5  
avfrog's Avatar
Senior Member
Joined: Oct 2009
Posts: 6,172
Likes: 1
From: Missouri
I suggest 4" tips also.
 
Reply




All times are GMT -4. The time now is 12:18 AM.