Little TPS help please.
Thread Starter
|
Member
Joined: Dec 2003
Posts: 67
Likes: 0
From: Wyoming
Little TPS help please.
So I decided to check my TPS in my '06. Here's the pics
My Truck
The engine bay
The little red thing you see is the latch to the sensor
Zoom'd in on it so you could see.
I've decided this is not the TPS but the MAS. There are two Torx screws holding it in place, size T20 if anyone is interested. With two screws, you can't rotate it to adjust voltage. Makes sense. So, where is the TPS? located?
My Truck
The engine bay
The little red thing you see is the latch to the sensor
Zoom'd in on it so you could see.I've decided this is not the TPS but the MAS. There are two Torx screws holding it in place, size T20 if anyone is interested. With two screws, you can't rotate it to adjust voltage. Makes sense. So, where is the TPS? located?
Thread Starter
|
Member
Joined: Dec 2003
Posts: 67
Likes: 0
From: Wyoming
Alright a little more inspection and I found that the sensor in my pics is the TPS. The MAS is on the backside of the plastic plenum right before it dumps into the the throttle body. So, now the question is how do you adjust it? two screws on the sensor don't allow it to be rotated.
