Good Idea or Bad Idea
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
Good Idea or Bad Idea
After some looking around and calling local shops, with a new baby, i have decided to just go with a super 44 SIDO and have pipes comming out the same side before the tire. The set up including muffler will be around 215. Is that a good deal? Especailly in VA? Also what tips would be good for a set up as such. Will this setup still sound good? Hate being broke 
I would much rather do dual out the back but that will run me around 450 here. It will be on a 1998 F150 XLT 4.6. Thanks for any input/help.
I would much rather do dual out the back but that will run me around 450 here. It will be on a 1998 F150 XLT 4.6. Thanks for any input/help.
Last edited by DDuan; Mar 11, 2009 at 07:35 AM.
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
[QUOTE=tarajerame;3629969]sounds fair if they are using stainless tips
what tips are you using? Are they tapered? or is that just the angle the pic was taken?
what tips are you using? Are they tapered? or is that just the angle the pic was taken?
Last edited by DDuan; Mar 11, 2009 at 10:24 AM.
Senior Member
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
they are 45* slash cut tips (stainless steel and the insides have been coated), the muffler shop felt I was a hassle but it came out awsome as you can see
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
how long are the tips you have?
Trending Topics
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
I have two 45*cut 3 1/2 outlet, but they are only 12in long..do you think that will be ok? will it still sound good?
Senior Member
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
correct, you got a good eye, thanks for the compliment
yes, you will be fine with those tips make sure you show the shop how you want the tips to be and they will do it for you
yes, you will be fine with those tips make sure you show the shop how you want the tips to be and they will do it for you
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
does the brand of the tip make any differnce? sorry for being just a noob at this...just trying to make sure I end up with the best possible setup with what i have.
Senior Member
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
I bought my tips from the muffler shop so I would say no as long as the tips are stainless you should be good to go...
12 inch tips are the shortest I would go, since you already have them no big deal
just make sure you post some before and after pics...
12 inch tips are the shortest I would go, since you already have them no big deal
just make sure you post some before and after pics...
Last edited by stoffer; Mar 11, 2009 at 03:54 PM. Reason: wording changes/corrections
Senior Member
Joined: Jan 2009
Posts: 3,172
Likes: 0
From: Destin, Florida
)Thank you good sir, no doubt. You have quite the collection
Thread Starter
|
Senior Member
Joined: Mar 2009
Posts: 120
Likes: 0
From: HAMPTON, VA/Langley AFB
sure will. Thanks for the help
Senior Member
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
I've seen like 30 different tip setups on this same type of exhaust exit location and they all look good so just make sure that you get exactly as you want it
I'm trying to dig up some pics of the exhaust on the underside so you can see the bends I did
I'm trying to dig up some pics of the exhaust on the underside so you can see the bends I did