Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

help needed

Old May 1, 2008 | 06:15 PM
  #1  
abervintageman4's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
help needed

okay so i am trying to find a glasspack that will fit my truck but the thing is i currently have a flowmaster and i want to keep my tip, the inlet is center and it has an offset outlet, is there a glasspack that will fit this? 2.5" inlet and outlet
 
Reply
Old May 1, 2008 | 08:39 PM
  #2  
abervintageman4's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
anyone?
 
Reply
Old May 1, 2008 | 08:41 PM
  #3  
ModBargains's Avatar
Suspended
Joined: Jan 2008
Posts: 1,169
Likes: 0
From: Brea, ca
Why are you looking for a glasspack? In my opinion the flowmaster will sound much better than the glasspack.
 
Reply
Old May 1, 2008 | 08:44 PM
  #4  
abervintageman4's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
yeah but its not loud enough and its a SI/SO and i have about 50 dollars to spend at most
 
Reply
Old May 1, 2008 | 08:49 PM
  #5  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Have you thought about doing away with the muffler completely? Your cats absorb a good bit of noise.
 
Reply
Old May 1, 2008 | 10:07 PM
  #6  
DarrenWS6's Avatar
Technical Article Contributor
Truck of the Month
Joined: Mar 2008
Posts: 16,436
Likes: 5
From: Mansfield, P.A.
True. Remove the muffler and give it a few revs and see how you like it. If you dont like it clamp it back in.

If not then buy the glasspack and pay another $20 for a shop to bend a pipe to connect it to the tip.
 
Reply
Old May 1, 2008 | 10:19 PM
  #7  
abervintageman4's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
i figured out what i am going to do to solve my problem, i am going to bend a piece of pipe, each side having a 90 degree angle somewhat resembling an s and then connect that to my tail pipe
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:13 PM.