Who out there makes a dual sameside exhaust "Harley style" that exits behind the rear tire?
Can the Magnaflow 16616 be modified to exit behind the tire instead of infront?
Any input is greatly apreciated.

 

you can have an exhaust shop build you something like that im sure...

 

Ya just like built said you can have a shop do it for you, thats what i had done with strait pipes after the cats but in front of the back tire. It is very inexpensive to have done. Check it out at my gallery.
https://www.f150online.com/galleries...cfm?gnum=10408

 

spintech used to,don't know if they still offer it

 

Lariat Chrome you have one of the best Custom Exhaust Shops right out your back Door. NOYZBOYZ,in Scarbourough,there is not much they cannot do.

 

I had a Spin Tech muffler and two straight-out-the-back pipes, but they asked where I wanted the pipes to exit and could have done them on the same side behind the tire, no problem. The shop I went to custom bends everything, every time. Took about 90 minutes to cut off the stock exhaust, weld a new muffler on and get the new pipes routed and installed (for under $300 USD total).

 

I have a CORSA and it has the TWIN TIP LOOK and I love it..