What Tips are u guys running ??
Thread Starter
|
Member
Joined: May 2006
Posts: 33
Likes: 0
From: Chicago
What Tips are u guys running ??
Hey ,
New 2006 F-150 Supercrew owner, in the market for an exhaust tip for the new ride. I plan on doing a full exhast down the road, but for now I just wanna do some nice/classy looking tip on the stock exhaust to help the overall appearance of the truck.
Let me know what you guys are running, and posting of pics is always a help. I am leaning towards something with a rolled edge, as I think they look alittle more "high end" than just a flat cut piece..
As usuall, ALL help is appreciated...
New 2006 F-150 Supercrew owner, in the market for an exhaust tip for the new ride. I plan on doing a full exhast down the road, but for now I just wanna do some nice/classy looking tip on the stock exhaust to help the overall appearance of the truck.
Let me know what you guys are running, and posting of pics is always a help. I am leaning towards something with a rolled edge, as I think they look alittle more "high end" than just a flat cut piece..
As usuall, ALL help is appreciated...
Senior Member
Joined: Apr 2005
Posts: 648
Likes: 3
From: Canton, Ohio
Trending Topics
Senior Member
Joined: Dec 2004
Posts: 462
Likes: 0
From:
Magnaflow 4"x18" rolled lip slash cut. I used a cut off wheel to cut the inlet to fit onto a 3" pipe.
http://performancepeddler.com/detail...CT_ID=MAG35117is where I got it.
KC-10 FE out...
http://performancepeddler.com/detail...CT_ID=MAG35117is where I got it.
KC-10 FE out...
Senior Member
Joined: Apr 2005
Posts: 648
Likes: 3
From: Canton, Ohio
Originally Posted by J_C
2 1/4"
Looks like 2.5 when I measure across the opening at the tip.
As far as length....at 12" there is a sharp bend, so I assume I need a tip shorter than that??
http://www.hottexhaust.com/03tipe.htm
What would fit best on a stock 98 exhaust?????
If it's really 2.25....is this what I want??
http://www.hottexhaust.com/detail.asp?product_id=35131
Last edited by jjmIII; Jun 16, 2006 at 02:43 PM.
