Exhaust & Intake Systems
Sponsored by:
Sponsored by: Real Truck

Anybody got any thoughts??

Thread Tools
 
Search this Thread
 
Old Dec 26, 2005 | 08:25 PM
  #1  
patshea098's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 4,176
Likes: 0
From: Braselton, Georgia
Anybody got any thoughts??

Anyone got any thoughts on this true-dual?? Not much information on it at all......actually none. But take a look at it.http://www.appleautos.com/custom-shop.aspx the F-150 of course.....its priced at $549
 
Reply
Old Dec 26, 2005 | 08:41 PM
  #2  
98Lariet4x4's Avatar
Senior Member
Joined: May 2005
Posts: 534
Likes: 0
From: Louisiana
These things here make me think they are seriously over-priced:

"Truck Bugshield - Smoked $119"
"Vent Shades - Smoked $129"
"Two Window Tint $119"
"Black Spray-In Bedliner - F-150/Ranger/SD $429"
 
Reply
Old Dec 26, 2005 | 11:19 PM
  #3  
98Navi's Avatar
Senior Member
Joined: Sep 2005
Posts: 2,618
Likes: 0
From: Atlanta, GA
Its high, can be done for much less. I have true 3 inch dual with high flow cats and flowmaster 40 series exiting behind the rr wheel and did it all for less than $350
 
Reply
Old Dec 27, 2005 | 12:39 AM
  #4  
patshea098's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 4,176
Likes: 0
From: Braselton, Georgia
98Navi, how much would you guess a true dual with flowmaster 40's 4 inch tips, stainless steel, with one pipe exiting behind the right rear tire and one pipe behind the left rear tire? I mean price made and installed. Thanks for the help.
 
Reply
Old Dec 27, 2005 | 08:56 AM
  #5  
98Navi's Avatar
Senior Member
Joined: Sep 2005
Posts: 2,618
Likes: 0
From: Atlanta, GA
Well, I'm not an exhasut installer, and I had mine done by a buddy who was bribed with atlanta motor speedway tickets, but its as simple as a couple cuts and a few welds after a little bending. Figure this: Sticks (8 feet) of pipe in 3 inch diameter are $16. You'd need two (of whatever size you get, I just know the 3 inch price) SO thats $32 right there. Add your mufflers, say flowmaster 40's, about $150 for the pair, and thats $182. If you elect to add cats then add another $150 or so for the high flow nice ones, $332 and then add labor for the guy to cut and bend and install.
 
Reply




All times are GMT -4. The time now is 01:56 AM.