Do it yourself?
Thread Starter
|
Junior Member
Joined: May 2005
Posts: 5
Likes: 0
From: Dayton Ohio
Do it yourself?
I am looking at a new Flowmaster super 40 muffler system for my F150 5.4 4X4. I was wondering if the muffler systems need to be professionally mounted. Do you need a welder? I also dont have large jacks to lift the truck very high. Do they make the pieces small enough so you dont need a walk-under jack?
Senior Member
Joined: Oct 2002
Posts: 5,358
Likes: 1
From: Commerce Twp, MI
I can use a creeper under my 4x4 truck. You can jack up the rear axle, or the body. I have a high lift hydraulic jack that still needs a 2x4 block to lift at the body under the doors.
You can use clamps instead of welding, but a decent exhaust shop can swap a muffler for $25-50.
You can use clamps instead of welding, but a decent exhaust shop can swap a muffler for $25-50.
