2006 gauge cluster problems

Thread Tools
 
Search this Thread
 
Old Jun 24, 2019 | 02:54 PM
  #1  
Schaeffer88's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2019
Posts: 2
Likes: 0
2006 gauge cluster problems

Everytime I turn my truck to the on position, every single needle moves way past where is should and shakes. When I drive my speedometer stops working . I checked fuses and out a new battery in and still isn’t working the best . Any info?
 
Reply
Old Jun 24, 2019 | 05:50 PM
  #2  
Labnerd's Avatar
Senior Member
Joined: Mar 2003
Posts: 2,226
Likes: 42
From: So. Texas
Research Dash Volt Regulator. Yours is probably going bad. They'll read high, they'll read low, sometimes won't read at all....and all of that can happen in 10 seconds.
https://www.google.com/search?source...10.b6WL9YrGxGE
 
Reply
Old Jun 24, 2019 | 08:21 PM
  #3  
ManualF150's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
Before digging too deep, I would have the alternator checked out.
 
Reply
Old Jun 25, 2019 | 12:29 PM
  #4  
Schaeffer88's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2019
Posts: 2
Likes: 0
Thanks for some ideas! I forgot to mention! I’ve also took the cluster out and re soldered some pins . But this video is what it’s been doing.
 
Reply
Old Jun 25, 2019 | 12:51 PM
  #5  
ManualF150's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
Since you took it out, I'd suggest looking at the wiring harness and the pins that the connector connects to. Make sure none of the pins are bent.
 
Reply




All times are GMT -4. The time now is 01:39 PM.