I have a 99f150 with a flatbed on the back. When I bought the truck it came with the stock bed, lights and tailgate. Now I'd like to put the stock bed back on the truck and put the flatbed on my Dad's Ram 2500.

My problem is that the wiring harness for the rear lights was cut and I don't have it.

What I'm looking for is some diagram that shows what wires go into each plug on the rear light. Or if someone could explain to me an easy way to do this I'd really appreciate it.

Thanks

 

Here is the read stop / turn diagram



the parking lamps is marked in there as the brown wire, even though it is not the cell for the parking lamps.

 

Very cool.

Thank you.