No power to fuel pump

Reply Subscribe

Thread Tools

Search this Thread

Mar 9, 2011 | 04:19 PM

#16

1fast4.6

Thread Starter

Senior Member

Joined: Oct 2006

Posts: 1,158

Likes: 0

From: Columbia, Missouri

Quote:

Originally Posted by SSCULLY

You mean you have pressure. Unless you checked it with a gauge, it is a guess.

BTW: What started all this ( ground, fuel inertia switch, etc ).

Just curious how all this stuff happened.

I took the truck completely apart :P and just now after 3 years im trying to get it to come back to life!
Check the link on my sig about installing air suspension

Mar 9, 2011 | 04:41 PM

#17

SSCULLY

Technical Article Contributor

Joined: Jun 2002

Posts: 10,511

Likes: 10

From: Under the flightpath of old ORD 22R

OK, that helps a bit. Did you check that the connectors for the Cam Position Sensors are installed ?

FIY : I have sigs turned off, got sick of the huge graphic of oneupmansship

Mar 9, 2011 | 04:59 PM

#18

1fast4.6

Thread Starter

Senior Member

Joined: Oct 2006

Posts: 1,158

Likes: 0

From: Columbia, Missouri

Ill double check

Mar 9, 2011 | 05:13 PM

#19

1fast4.6

Thread Starter

Senior Member

Joined: Oct 2006

Posts: 1,158

Likes: 0

From: Columbia, Missouri

Sensor is plugged in

Mar 9, 2011 | 09:07 PM

#20

1fast4.6

Thread Starter

Senior Member

Joined: Oct 2006

Posts: 1,158

Likes: 0

From: Columbia, Missouri

Checked all my grounds and all checked out good. Both sensors are connected. Is the coil packs grounded through the PCM? They seem to have juice all the time when the key is on. If so it has me scratching my head as to why its not working. The two fuses in the box are good aswell.

May 24, 2015 | 02:01 PM

#21

65fordsbabygirl

Junior Member

Joined: May 2015

Posts: 1

Likes: 0

No power to fuel pump

I tried what sscully said jumped a wire in the distribution box that went to fuel pump relay pump came on then put the relay back it still runs don't know what the fix was guess the old girl just needed a shock !!!

Sep 5, 2016 | 12:17 PM

#22

Bruce Owens

Junior Member

Joined: Sep 2016

Posts: 1

Likes: 0

Ok I have the same problem really..

I jumped my fuel pump relay but still isn't coming on.. I ran a hot wire and the pump came on but now power to the pump from harness.. It does have power in the relay and in the fuse... And fuel pump is good.. Check engine light is on but when I scan it it does not show any codes... Had same problem with other scanners I tried... And PCM fuse and relay are good???