Adding Fog Lights in Bumper

Thread Tools
 
Search this Thread
 
Old Dec 22, 2010 | 08:12 PM
  #1  
bcbnine's Avatar
Thread Starter
|
Member
Joined: Mar 2002
Posts: 86
Likes: 0
From: Raceland, Louisiana
Adding Fog Lights in Bumper

Has anyone added fog lights in the opening of the front bumper? If so, please post pics and maybe some instructions. I would like to add some yellow fog lights in the opening of the front bumper on both sides of the lisence plate bracket. I want to run a toggle switch to the dash so I can use them for rain/fog days. I have a 2007 SuperCrew with the factory fog lights.

Thanks,
Blake
 
Reply
Old Dec 22, 2010 | 09:29 PM
  #2  
DJ2007's Avatar
Senior Member
Joined: Dec 2007
Posts: 210
Likes: 0
From: Santa Fe, Texas
I mounted some driving lights in that opening. Check out the pics in my profile.
 
Reply
Old Dec 22, 2010 | 09:44 PM
  #3  
bcbnine's Avatar
Thread Starter
|
Member
Joined: Mar 2002
Posts: 86
Likes: 0
From: Raceland, Louisiana
That is what I am looking to do. Thanks for the response. I sent you a PM!!
 
Reply
Old Dec 23, 2010 | 01:54 AM
  #4  
Steve83's Avatar
Senior Member
Joined: Nov 2006
Posts: 5,495
Likes: 7
From: Memphis, TN 38135, USA, Earth
Tap into the fuel pump relay output & pull that wire to the toggle in the dash. Run the wire out of the toggle to pin 85 of a Bosch/ISO relay. Run pin 86 to the high beam indicator circuit. Add a fuse in an empty location in your fuse block & run that to pin 30 of the relay. Run pin 87 to the fog lights. That'll make them safe, fully automatic, & legal.

.
 
Reply




All times are GMT -4. The time now is 07:58 PM.