cluster swap
Thread Starter
|
Member
Joined: Oct 2010
Posts: 14
Likes: 0
From: Arkansas
cluster swap
I have access to a 2001 expy, it has a instrument cluster that has a tach. The question is will that tach work in my 2003 f150 xl. If so is it a direct fit? Any ideas or advice would be great. Thanks
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Seem to recall a few differences between the EPXPY F-150 Cluster. Not 1:1 pin compatible. I could be wrong about that, saw it in a thread here.
At the very least you will need to have the PATS key erased from the new Cluster's HEC and have 2 new keys programmed ( part of the same erase all stored keys procedure ) when you get the new cluster in.
At the very least you will need to have the PATS key erased from the new Cluster's HEC and have 2 new keys programmed ( part of the same erase all stored keys procedure ) when you get the new cluster in.
Last edited by SSCULLY; Nov 11, 2010 at 03:58 PM. Reason: spelling correction
