One touch window switches?
Senior Member
Joined: Nov 2006
Posts: 5,495
Likes: 7
From: Memphis, TN 38135, USA, Earth
It's fairly easy using older Ford OTD modules.
http://www.crownvic.net/ubbthreads/u...Number=1774105
http://www.crownvic.net/ubbthreads/u...Number=1774105
Senior Member
Joined: Oct 2005
Posts: 106
Likes: 0
From: AZ
Click on Specials in the column on the left, and look for One Touch Down window module kits. I have these and they work great.
http://www.ponyperformance.com/
http://www.ponyperformance.com/
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Pony Performance are the Ford OTD modules referenced above.
Don't know if the diagram I sent him for the rear slider is included now or not, but this is what I made up :
I need to order another one, I took out my rear driver's side module and put it in mom's van for the passenger side.
Don't know if the diagram I sent him for the rear slider is included now or not, but this is what I made up :
I need to order another one, I took out my rear driver's side module and put it in mom's van for the passenger side.
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
The Ford part is a One Touch Down only.
Senior Member
Joined: Nov 2006
Posts: 5,495
Likes: 7
From: Memphis, TN 38135, USA, Earth
You can connect them to the up side and they'll do that, too. But you'd need 2 modules per window; maybe even 2 per switch, but I can't remember. I think it's discussed in that CVN thread.
