Need help with power window remova.l Removed bolt but do not know how to remove the pieces that look like pop rivets sort of. Does this take a special tool. Thanks for any reply

 

To remove the pop rivets, you need to punch out the center with a small punch and use a 1/4 drill bit to drill them out. You also need to have 1/4 rivets to install as well. Some people have used bolts to replace them with but I have not tried that. Good luck

 

The rivets are for the mount, no need to take them out.

Here is a thread that shows where to drill for the bolts ( actually self tapping hex head screws ) on the motor.

https://www.f150online.com/forums/el...dow-motor.html

 

I didn't know you could do that. Good info, SSCULLY!

mhancox: Let me know if you need a motor. I might be able to help you out.

Andy

 

Thanks for the help worked great and motor is working great.