flashers won't flash
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
flashers as in Hazards ?
Some times the hazard contacts get dirty from lack of use.
A few threads report that cycling the hazard button a few times will clean them off.
If this does not work, time to remove the MFS ( MultiFunction Switch ) and test them prior to replacing it.
Some times the hazard contacts get dirty from lack of use.
A few threads report that cycling the hazard button a few times will clean them off.
If this does not work, time to remove the MFS ( MultiFunction Switch ) and test them prior to replacing it.
