Fuse #15 keeps blowing....
Thread Starter
|
Junior Member
Joined: Sep 2000
Posts: 6
Likes: 0
From: Ca USA
Fuse #15 keeps blowing....
Hi all....
I have a 2000 F150 and today it blew fuse #15. I replaced it and it blows everytime, sometimes it taked longer than others.
It is a 5 amp fuse and affects the power windows, the overhaed lamps, the windshield wipers, and when blown will not allow me to shift out of park. This last bit means I have to replace the fuse everytime I get in the vehicle.
The manual says #15 is for the stop lamp switch, GEM module, Rabs test connector.
I'm thinking it could be the sensor on the brake maybe? I don't know why else it would not let me shift unless it could not tell I was holding down the brake.......
Any thought would greatly appreciated.....
I have a 2000 F150 and today it blew fuse #15. I replaced it and it blows everytime, sometimes it taked longer than others.
It is a 5 amp fuse and affects the power windows, the overhaed lamps, the windshield wipers, and when blown will not allow me to shift out of park. This last bit means I have to replace the fuse everytime I get in the vehicle.
The manual says #15 is for the stop lamp switch, GEM module, Rabs test connector.
I'm thinking it could be the sensor on the brake maybe? I don't know why else it would not let me shift unless it could not tell I was holding down the brake.......
Any thought would greatly appreciated.....
Senior Member
Joined: Nov 1999
Posts: 121
Likes: 0
From: Nashville,TN USA
sounds like a short somewhere I'l assume that your still under warranty since its a 2000, so I'd take it to the dealer, could be a bad GEM
------------------
BigBunnell
98 F150 4X4 XLT flareside V6 5sp K&N Flowmaster and some other goodies
------------------
BigBunnell
98 F150 4X4 XLT flareside V6 5sp K&N Flowmaster and some other goodies