F150online Forums

I need an electrician's advice...

Thread Tools
 
Search this Thread
 
Old Aug 11, 2000 | 10:49 AM
Share
  #1  
gofish's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2000
Posts: 327
Likes: 0
Post I need an electrician's advice...
Hey Guys,

If I want to run a 'trunk' or main line with a capacity of 30 Amps through 16 ft. of wire at 12 volts, what gauge wire should I use?

Thanks! fish
 
Reply
0
Old Aug 11, 2000 | 11:47 AM
Share
  #2  
jr's Avatar
jr
Junior Member
Joined: Dec 1998
Posts: 2
Likes: 0
From: Greenwood Ind. U.S.A.
Post
Go With #10 and if you can find it get MTW (Machine tool wire) its very flexible and can with stand heat and cold better than regular wire + dont forget a fuse.
 
Reply
0
Old Aug 11, 2000 | 01:56 PM
Share
  #3  
gofish's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2000
Posts: 327
Likes: 0
Post
Jr and Jimb,

Thanks a lot for the quick responses! and Jimb--I've been looking all morning through my bookmarks for this site!
 
Reply
0
Old Aug 12, 2000 | 12:14 AM
Share
  #4  
Jimb's Avatar
Senior Member
Joined: Oct 1999
Posts: 219
Likes: 0
From: Michigan
Post
There is an excellent technical article with the exact information you need.
Check it out:
https://www.f150online.com/tech/electrical1.html
 
Reply
0
Back to Subforum
Electrical Systems
View Next Unread
Fuse 8 keeps blowing




Advanced Search

All times are GMT -4. The time now is 12:13 PM.