Need help with factory keyless remote...
#1
#3
I can unlock the doors with the keypad on the door and the unlock buttons. Need to look in the manual for what fuse it is, only have the one remote, and how do you program the fob. I didn't think I would have to do that since I have been useing it since I bought the truck.
#4
Join Date: Jun 2002
Location: Under the flightpath of old ORD 22R
Posts: 10,511
Likes: 0
Received 7 Likes
on
7 Posts
So we have confirmation that the door locks themselves are working ( don't want to assume that the RKE not opening them is not a PDL problem ).
Checking the fuses is a good thing to start with when something electrical is not working. Better than assuming the RKE fob battery was dead.
The fuse locations for the CSM ( Central Security Module ) are :
BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) fuse # 115 for the Supercrew or fuse #8 for all other cab configurations.
CJB ( aka Central Junction Box, cab fuse panel ) fuses # 29 & 15
The how to program the RKE fob is in the owners manual
Trying to program the RKE fob is one step in the problem determination steps. If it was working you would not have to do this.
Checking the fuses is a good thing to start with when something electrical is not working. Better than assuming the RKE fob battery was dead.
The fuse locations for the CSM ( Central Security Module ) are :
BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) fuse # 115 for the Supercrew or fuse #8 for all other cab configurations.
CJB ( aka Central Junction Box, cab fuse panel ) fuses # 29 & 15
The how to program the RKE fob is in the owners manual
Trying to program the RKE fob is one step in the problem determination steps. If it was working you would not have to do this.
#6