cruise control
#3
yes i changed rear third brake light to the recon lamp and put in putco led bulbs / dont know if the chmsl works get nothing when i turn on the switch at the wheel / i have had leds bulbs in for a while i upgrade to a newer bulb dont recall if cruise worked before these bulbs would this affect the abs as well
#6
Join Date: Jun 2002
Location: Under the flightpath of old ORD 22R
Posts: 10,511
Likes: 0
Received 7 Likes
on
7 Posts
Don't recall if the CHMSL as a LED with standard bulbs did the trick, I would think so.
I have a cap installed, and it is a LED CHMSL, and I have standard bulbs in the tail lamp housings, and my CC works. Never metered it, to see if there is a load resistor by the manufacture or not.
Try replacing the Stop/Tun/Tail bulbs back to incandescent bulbs, and test the CC.
I have a cap installed, and it is a LED CHMSL, and I have standard bulbs in the tail lamp housings, and my CC works. Never metered it, to see if there is a load resistor by the manufacture or not.
Try replacing the Stop/Tun/Tail bulbs back to incandescent bulbs, and test the CC.