Lighting Wire Harness Activation
Thread Starter
|
Member
Joined: Jun 2009
Posts: 90
Likes: 5
From: Lafayette
Lighting Wire Harness Activation
I have a 2002 F1250 Supercrew. I noticed that I have two wire harnessess behind the air dam. Also on the drivers side I have a two wire connector that stays hot, 12VDC, all the time. How do I get power to the two harnessess? I do not have the factory running lights and would like to use these. Any help will be appreciated.
Thanks
Thanks
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
There are a few threads on this in the electrical forum and in the 1997-2003 forum.
The short, change the switch to a fog lamp type switch, install the fog lamp switch fuse, fog lamp relay, and fog lamp fuses, and plug in the lights.
The short, change the switch to a fog lamp type switch, install the fog lamp switch fuse, fog lamp relay, and fog lamp fuses, and plug in the lights.