Bill Howard
Thread Starter
|
Junior Member
Joined: Feb 2004
Posts: 4
Likes: 0
From: Cocoa Beach, FL
Bill Howard
2004 F150- drivers door electric window failed; inspection shows control cable
jacket fitting not attached to controler. Looks like plastic failed.
Any suggestions in the removal of the assembly. Looks like the rivets on the assembly arm attached to the foward track will have to be drilled out (?) What part/assembly are available for this repair.
if anyone can walk me through the process it will be greatly appreciated.
I currently have the glass assembly in the up position using wood wedged to the horizontal door stiffnerThanks,Bill
jacket fitting not attached to controler. Looks like plastic failed.
Any suggestions in the removal of the assembly. Looks like the rivets on the assembly arm attached to the foward track will have to be drilled out (?) What part/assembly are available for this repair.
if anyone can walk me through the process it will be greatly appreciated.
I currently have the glass assembly in the up position using wood wedged to the horizontal door stiffnerThanks,Bill
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2007
Posts: 7,890
Likes: 61
From: Among javelinas and scorpions in Zoniestan
I'm having trouble visualizing your problem, Bill. Is it possible to post some pictures of what you are describing?
And, you might get much more in the way of useful responses if your subject line were not "Bill Howard". Somethng like "Driver's electrical window failure - how to fix?" might get more interest.
- Jack
And, you might get much more in the way of useful responses if your subject line were not "Bill Howard". Somethng like "Driver's electrical window failure - how to fix?" might get more interest.
- Jack
Electric window failure
