On my 2002 f150 the overhead console thermometer and compass have stopped working. I did a search and really didn't find this particular issue.

Anyone have any ideas about what could be the problem? I'm most great full for any information.

 

Is there a search or cracked windshield in the area of the censors?

 

No cracks and all of the rock chips get repaired right away. There is a heavy layer of muddy road grime from our recent Chinook weather.

 

i have a 2000 150 and they do not work also. Looking for some answers too.
No cracked windshield.

 

i noticed this morning that my therm. & compass overhead display was blank, dead, no lights at all .. it was working last night .. seems as if a fuse went out but i find no reference to any fuse for it in the owners manual .. unless it's some acronym i don't understand .. is there a fuse ?? .. the dome light works .. 2001 f-150 supercrew lariat

 

Same problem, took the truck to a ford dealer and got the nowhere , no ideas, nothing..... Anybody do better?

 

Here is something you can try, http://www.ford-trucks.com/forums/44...-gone-out.html
Mine doesn't work either, and I am planning on doing this procedure to see it fixes it. But so far have not had the time to do it.

 

i have a02 F150
My Compas/Temp goes blank too.

but it comes back on after a while.

Like it has a mind of its own.

 

Just tagging along hoping to find something out....

 

mine did same remove from truck and inspect circuit board i found component had cracked off board soldered back on compass and temp work again 10 min fox

 

How do you remove the console/circuit board?

 

Thanks aredzfan for that link, I've been tryin to get mine to work again with no luck. After reading that link, re-soldered the connections on 2 of them and its back to life! I do love saving money when and where I can

 

There is a How To in our Articles and How To section.

 

They had a time out in the game, here you go.

https://www.f150online.com/forums/ar...ay-repair.html

 

As described, I soldered the two resistors in place, compass and thermomet work great.