Headlights Inop

Thread Tools
 
Search this Thread
 
Old Jan 5, 2007 | 10:37 PM
  #1  
keepkool's Avatar
Thread Starter
|
Member
Joined: Jan 2007
Posts: 12
Likes: 0
Headlights Inop

Just picked up my 2007 f150 crew cab on 1-2-07. autostart was installed on 1-4 . everything worked on pickup but now no Headlights (Low or high). running lights and fog lights work fine. anyone have any Ideas where to start. thansk all. kevin
 

Last edited by keepkool; Jan 6, 2007 at 09:50 AM.
Reply
Old Jan 5, 2007 | 11:12 PM
  #2  
bullseye670's Avatar
Senior Member
Joined: Oct 2006
Posts: 187
Likes: 0
From: Michigan
Originally Posted by keepkool
Just picked up my 2007 f150 crew cab on 1-2-07. autostart was installed on 2-4-07. everything worked on pickup but now no Headlights (Low or high). running lights and fog lights work fine. anyone have any Ideas where to start. thansk all. kevin
Sounds like they aren't going in till next month! 2-4-07

sorry, I couldn't resist!
 
Reply
Old Jan 5, 2007 | 11:40 PM
  #3  
SSCULLY's Avatar
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Maybe check the fuses first.

If they are good, next would be to see if you have power at the headlamp bulb connector with a volt meter.

If neither of these are it, then going to need some additional info I did not see in your profile ( hope I did not miss it in the signature area ).

Trim Level ( XL - XLT, Lariat, etc ).

Do you have Autolamps ( might be answered depending on the trim level, if not is can be an option ).

Do you have DRL ( Day time Running lamps ) ?

Those are the first places to start.
I take it you don't want the dealer to play with it again, thus why you are working on a '07 that is only 4 days old ( and I took the 2-4-07 to be a typo of 1-4-07 ).
 
Reply
Old Jan 6, 2007 | 05:35 PM
  #4  
keepkool's Avatar
Thread Starter
|
Member
Joined: Jan 2007
Posts: 12
Likes: 0
all better

sorry for the type-o earlier. Truck lighting is repaired. wiring harness pin not clicked in all the way. will have some pics up later. thanks kevin
 
Reply




All times are GMT -4. The time now is 12:41 PM.