My light has been on for a long time now. I got the edge evo and checked it. It came up with 2 codes, here is what they said. P1000-OBD 2 MONITOR,CHECKS NOT COMPLETE MORE DRIVING REQUIRED. Here is the other. P0102-MASS AIR FLOW CIRCUIT LOW INPUT. Could someone please tell me what they mean? Thank you

 

I found this website that might be helpful - http://www.obd-codes.com

P0102
P1000

Looks like the P1000 is caused by the P0102! Hope this helps.

 

Worry about the P0102 only. The P1000 will clear itself eventually when all other issues are corrected.

P0102 is likely to be due to a fault in the wiring to the MAF sensor, the sensor itself, or the PCM. There is a specific step-by-step diagnostic procedure in the service manual to pinpoint the fault.

Steve

 

thanks for your input, i will try cleaning the MAS.

 

OOps I got the link wrong above, I have fixed them.

 

I did some searching and found that the wire wasnt connected, and thats all the problem was. Thanks for all your help anyway.