intermitant oil pressure gague problem

Thread Tools
 
Search this Thread
 
Old May 11, 2006 | 11:03 PM
  #1  
papacfus's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2006
Posts: 4
Likes: 0
Lightbulb intermitant oil pressure gague problem

I have a 2000 F-150 with 4.6 and auto 2wd. On ocasion the oil pressure gage sweeps and somtimes wont come on till the truck is warm. I am tired of freaking out every time this happens. I recently installed new battery, which solved spedo sweeping. Does this truck have a fuel cut off relay if there is reely no oil pressure?any body have a suggestions.
 
Reply
Old May 12, 2006 | 07:49 AM
  #2  
mikey9's Avatar
Member
Joined: Feb 2006
Posts: 48
Likes: 0
Have you tried changing your oil?
 
Reply
Old May 12, 2006 | 09:31 AM
  #3  
projectSHO89's Avatar
Senior Member
20 Year Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
Replace the pressure sender switch. They're notorious for failures.

Steve
 
Reply
Old Sep 26, 2017 | 03:40 AM
  #4  
Jordan 01's Avatar
Junior Member
Joined: Sep 2017
Posts: 2
Likes: 0
From: Montana
Oil Pressure Gauge

I have an 01 F150 Super Crew. Changed the oil changed the oil pressure sensor and my oil pressure gauge pigs at the top all the time since i got the truck. What would cause it to go straight to pigged at the top of the gauge from when its put into drive?
 
Reply
Old Sep 26, 2017 | 04:52 PM
  #5  
projectSHO89's Avatar
Senior Member
20 Year Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
Originally Posted by Jordan 01
I have an 01 F150 Super Crew. Changed the oil changed the oil pressure sensor and my oil pressure gauge pigs at the top all the time since i got the truck. What would cause it to go straight to pigged at the top of the gauge from when its put into drive?
Instrument cluster problem.
 
Reply
Old Sep 26, 2017 | 06:30 PM
  #6  
Roadie's Avatar
Senior Member
Joined: Jan 2002
Posts: 5,994
Likes: 221
From: Wilmington,NC
Did it peg high before you changed the sensor? I'm assuming it did or you wouldn't have changed it. What projectSHO89 said.
 
Reply




All times are GMT -4. The time now is 08:18 PM.