help with tach install (NEEDS HELP PLEASE)

Thread Tools
 
Search this Thread
 
Old Jan 28, 2006 | 02:47 AM
  #1  
Jason1973's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 7
Likes: 0
From: Tulsa Oklahoma
help with tach install (NEEDS HELP PLEASE)

hey i have a 95 f150 with 4.9 and 5 spd and i want to install an autometer tach and need help on where to hook the wire up to the coil or somewhere else it has a coil pack i think not the old soda can lookin one but the little box type it has the coil wire to the cap and another plug with 2 wires do i splice into one of those or somewere else?
 
Reply
Old Jan 30, 2006 | 03:33 AM
  #2  
PKRWUD's Avatar
Senior Member
Joined: Sep 1999
Posts: 3,083
Likes: 0
From: Ventura, California
The red wire goes to a 12v source that's only hot when the key is on.
The black wire goes to ground.
The white wire goes to a dash lamp.
The green wire goes to the negative post on the coil (black wire w/ light green tracer).
 
Reply




All times are GMT -4. The time now is 06:13 PM.