Tryed to fix a light in Cluster & Now the whole thing is DEAD! NEWBIE HERE<<

Old Dec 21, 2005 | 01:30 PM
  #1  
larry_chip's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2005
Posts: 9
Likes: 0
Tryed to fix a light in Cluster & Now the whole thing is DEAD! NEWBIE HERE<<

Hello I'm new to the F150 Forum,

i have a 97 F150 & I Took the cluster out because a few of the lights died in there & i could not see to good at night, after i fixed them i reinstalled everything & now my whole cluster is dead! MPH,RPM,Gas & Everything else!, my 4x4 Light wont go on but some stuff still works like the turn singnals airbag light & some other ones, anyone have any help for this one?
 
Reply
Old Dec 21, 2005 | 06:15 PM
  #2  
98Navi's Avatar
Senior Member
Joined: Sep 2005
Posts: 2,618
Likes: 0
From: Atlanta, GA
Sounds like you didn't get it plugged in good enough, or you blew the fuse.
 
Reply
Old Dec 21, 2005 | 11:47 PM
  #3  
larry_chip's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2005
Posts: 9
Likes: 0
everything is pluged good & i checked all the fuses?
i used a flat head screw driver to get the old light old, i'm thinking i blew something out, my screwdriver hit that green plastic like thingy on the rear of the cluster, i checked the 3 fuses for the Insurment Cluster & there all fine, are there more i don't no of? please help i need to start useing this truck again. my Odometer stop clicking also with the rpm & mph & gas & heat, but turn singnals & some of the lights come on, but the 4x4 Dose not come on?
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:24 PM.