Keyless Entry Problem
Thread Starter
|
Member
Joined: Jul 2003
Posts: 79
Likes: 0
From: Nebraska
Keyless Entry Problem
I want to change the key code on my 01 screw. in the manual it only says how to add a code. I want only one code and not the one that was given to me in the factory. Does any body know how to change the factory set keycode. Thanks
Matt
Matt
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Replace the RAP / CSM ( mfgr date Dependant as to which it is ).
The factory code is actually ( correctly ) called the permanent code, only changing the module out can change it.
Sorry for the bad news.
The factory code is actually ( correctly ) called the permanent code, only changing the module out can change it.
Sorry for the bad news.
